Page 522 - Buck & Hickman Industrial Supplies 2016

Automotive Service & Repair
SKF Pullers
SKF EasyPull - Hydraulic Jaw Puller
• Ready-to-use, integrated hydraulic cylinder, pump and puller – thus it is assembly- free and it is not necessary to purchase separate parts
• Safety valve prevents spindles and pullers from being overloaded if excessive force is applied
• The spring-loaded centre point on the hydraulic spindle allows easy centring of the puller on the shaft without damaging the shaft
• The TMMA 100H has a maximum withdrawal force of 100 kN (11.2 US ton) and a long stroke of 80 mm (3.1 in.), which facilitates most dismounting jobs in just one operation
• For dismounting jobs requiring less force, SKF offers a 75 kN (8.4 US ton) version, the hydraulic EasyPull TMMA 75H with a maximum stroke of 75 mm (3 in.)
• Supplied with extension pieces and one nosepiece
Order Code Part Number
1437934 TMMA 75H
1437935 TMMA 100H
Puller Leg Reach Puller Leg Reach Range
200 mm 52-200 mm
250 mm 75-250 mm
Price each
622.00
823.12
SKF EasyPull - Hydraulic Jaw Puller Set
• A set consisting of a hydraulically assisted SKF EasyPull together with a tri-section pulling plate, TMMS series, and a puller protection blanket facilitate an easy, safe and virtually damage-free dismounting
• Especially suitable for dismounting spherical roller and CARB toroidal roller bearings, and other components such as pulleys and flywheels
• A puller protection blanket, TMMX series, made of a strong transparent material allows the user to visually follow the dismounting procedure. While dismounting, the blanket helps to protect from flying fragments of bearings or other components, thereby enhancing user safety
• A sturdy custom-made storage case with room for all parts minimises the risk of loosing or damaging the set’s components
Price Order Code Part Number Puller Leg Reach Puller Leg Reach Range each
1437936 TMMA 100H/SET 250 mm 75-250 mm 937.70
Internal Bearing Puller Kit
The SKF TMIP kits are specially designed for dismounting bearings from housings where the fit is on the outer ring. The combination of unique spring-loaded extractors and an ergonomically designed sliding hammer help enable a safe, fast and easy removal of the bearing. Unlike other internal bearing pullers, the extractors can be correctly positioned in just one quick action.
• Unique design saves dismounting time
• Easy removal of bearings from housings
• Designed to suit a wide range of bearing bore diameters; the selection of extractors is easy
• Puller constructed for optimum strength and durability
• Spring loaded extractors allow quick and easy fitting of the extractor to the inner ring
• Claw design provides a strong and secure grip behind the inner ring, allowing a high puller force to be applied
• Ergonomic sliding hammer enhances user safety
• SKF design, patent pending
7663
322.96
480.72
Order Code
184021
1437932
Part Number Bore Diameter Range
TMIP7-28 7-28 mm
TMIP 30-60 30-60 mm
Price each
Deep Groove Ball Bearing Puller Kit
The puller is suitable for use in both blind housings and shaft applications.
The SKF TMMD 100 is suitable for dismounting up to 71 different SKF deep groove ball bearings, with shaft diameters ranging between
10 and 100 mm (0.4–3.9 in.).
• The claws are designed to precisely fit in the bearing’s raceway, providing a good grip, thereby allowing high dismounting forces
• Each puller arm is fitted with a spring for easy installation
• The claw has been designed to allow easy insertion
• The hexagon head of the spindle is designed to prevent the spanner sliding down the spindle during dismounting
• The puller can also be used to remove sealed bearings from blind housings, after the seal has been removed
Price Order Code Part Number Bore Diameter Range Puller Leg Reach Range each
1285381 TMMD100 10-100 mm 135-170 mm 657.38
504
7662 7648 7644