Page 548 - Fluid Power

Pneumatics
For any other Part Numbers or Types you require please contact your local Brammer Sales & Service Centre.
Accessories P2LAX, flexible manifold assembly
A practical system solution with the aid of connection pieces. The manifolds can easily be assembled from the top to form a compact and stable block. The block can then be installed in cabinets or directly on the machine frame as shown in the example in the bottom of this page.
Connection block S:
straight connection block with a side ports for common air supply and exhaust.
Connection block L:
angled connection block for top or bottom ported.
End cover
20
Valve:
with cylinder ports 2 and 4 and signal ports 12 and 14 facing upwards, enabling easily access to connection ports. All ports are G1/8 threaded to simplify choice of connectors.
Manifold:
with common channels for ports 1, 3 and 5.
Connection block S:
straight connection block with a side ports for common air supply and exhaust.
Connection block L:
angled connection block for top or bottom ported.
End cover
Intermediate block L:
enables the block to be divided for different supply pressure. Top or bottom ported.
Intermediate block T:
permits the connection of air between two manifolds. Top or bottom ports.
2. With M5 screws from the top in any manifold
Assemble with the indication line (10 mm long line) on the same side on all blocks.
Blanking plate:
To incorporate spare positions.
Various mounting options
1. With M6 screws for installation from the connection blocks.
3. With a self-tapping M6 screw from below to any manifold.
918
FREE 24/7 technical support – Tel: 0870 240 2100
Pneumatics & Vacuum