Page 28 - Fluid Power

Hose, Tubes & Ducting
For any other Part Numbers or Types you require please contact your local Brammer Sales & Service Centre.
Assembly Instructions for Push-Lok Fittings Assembly Tools
Assembly Instructions
1. Cut the hose right angled with a sharp knife. If necessary it is possible to use a lubricant (water/soap solution with 5 % soap fluid and 95 % water) for easy assembly.
2. Insert fitting into hose until first barb is in hose. Place end of fitting against a flat object (bench, door, wall) and grip hose approximately 1" from end and push with a steady force until end of hose is covered by yellow plastic collar. Alternatively please use the Parker Assembly Tool No. 611050G or 611050HV.
Attention!
During assembly, please keep in mind that Push-Lok fittings will provide an effective grip only when the Push-Lok hose is pushed fully on the insert, where the cropped end of the hose should be fully concealed
by the plastic collar. For easy assembly of hose 830M, 837BM and 837PU please use only Push-Lok Assembly Oil No. H896137. Push-Lok Assembly Oil is free from wetting disturbing substances.
Don’t use oil, lubricant or soap fluids for this hose!
Disassembly Instructions
1. Cut lengthwise along a line at approximately a 20° angle from centre line of hose. The cut should be approximately 1" long.
Be careful not to nick barbs when cutting the hose.
2. Grip hose and give a sharp down-ward tug to disengage from fitting.
Attention!
Before re-use of the nipple please check nipple for damage. Damaged nipples can cause leakage.
Assembly Tool
Tool designed for assembly of Push-Lok fittings and hose
in all sizes. Toggle actions greatly reduce effort necessary to hold hose and press in fitting. Only a few pounds of force is needed on either handle to quickly assemble any size.
Light version
Part No. 611050G
Heavy version
Part No. 611050HV
17
Push-Lok Assembly Oil
1-litre bottle Part No. H896137
398
90 Brammer Sales & Service Centres nationwide – Tel: 0870 240 2100
Hose, Tubes & Ducting