Page 157 - Fluid Power

Hydraulics
For any other Part Numbers or Types you require please contact your local Brammer Sales & Service Centre.
Benefits
• Compact overall package size
• Quiet operation
• Low flow ripple to further reduce noise
• Elastomer seals that eliminate gaskets and external leakage
• High operating efficiency for lower power consumption and reduced heat generation
• Simple hydraulic controls with “no-leak” adjustments
• SAE and ISO standard mounting flanges and ports
• Long life, tapered-roller shaft bearings
• Long life, low friction, hydrostatically balanced swash plate saddle bearings
• Full power through-drive capability
• End or side inlet and outlet ports
• Case drain ports for horizontal or vertical, shaft-up mounting
• Optional minimum and maximum displacement adjustments
• Optional case-to-inlet check valve to extend shaft seal life
• Easy to service
Ripple Chamber Technology
The chart refers to the “Ripple Chamber “ technology engineered into the P1/PD 18, 28 and 45 Series, side ported pumps. The ripple chamber reduces pressure pulsations (called ripple) at the outlet of the pump by 40-60%. This leads to a significant reduction in overall system noise, without the added expense of noise dampening components.
18
P1 045 Pressure Ripple, Average of 3 pumps
5.0
4.5
4.0
3.5
3.0
2.5
2.0
1.5
1.0
0.5
0.0
2600 rpm without ripple chamber
2600 rpm with ripple chamber
35 70 105 140 175 210 245 280
Output pressure (bar)
Contact Brammer on 0870 240 2100 Hydraulics 527
Average ripple pressure (bar)
Hydraulics