Page 900 - Industrial Supplies Catalogue (MRO) 2015|16

Filtration
Filter elements
94632
Filter elements
1 Filter elements for liquid filters (degree of filtration 2-500 μm, nominal size 5-1800, differential pressure resistant up to 210 bar)
MAHLE filter elements are the centrepiece of all hydraulic and lubrication filters.
Always designed to meet the standards of the cleanliness class, pressure requirements, and characteristics of the medium, stable and constant-pressure MAHLE filter elements with their high contamination retention capacity ensure economical and trouble-free operation. Our extensive range of standard- and DIN-version products also contains alternative variants for virtually every make of filter and filter element for aggressive fluids, cooling lubricants, and aqueous media.
We will also develop special versions to meet individual customer requirements.
Filter material PS and Sm-N:
In a hydraulic or lubrication system a filter has the task to reduce the contamination to the accepted cleanliness level and to keep it for as long as possible. For the identification of solid particles in industrial hydraulics it is common practice to count particles according to ISO 4406. Subsequently the achievable cleanliness classes of the Sm-x and Sm-N. These values mirror our longtime experience in designing hydraulic filters and could be considered as guide values.
Filter material Mic:
Depth filters made of cellulose or glass fibre layers with a high dirt holding capacity and a low flow resistance. Degree of filtration 10 μm and 25 μm according to MAHLE norm. Use in hydraulic oil and lubricants filtration as suction filter as well as low cost filtration in plants with minor demands in regards to the filtrat quality.
Filter material Drg:
Surface filters made of stainless steel wire mesh with a very low flow resistance designed in the following weaves: plait, twill and linen. Degree of filtration 10 μm, 25 μm, 40 μm, 60 μm, 100 μm, 200 μm, 300 μm and 500 μm. For a wire mesh filter element the degree of filtration is determined by the largest diameter of a globular particle which would be able to pass the fabric. Wire mesh filter elements are used in hydraulic oil and lubricants filtration as suction or coarse filters, for high viscose fluids as well as safety filters for coolant filtration. Wire mesh elements possess a defined removal size as surface filter and a low dirt holding capacity as depth filter.
Filter material KS-Mic:
Depth filter consisting of several, coordinated, binder-free polyester materials with a very high dirt holding capacity and low flow resistance. Degree of filtration: 25 μm according to MAHLE norm. Use as disposable filter in coolant filtration.
Filter material WS-Mic, WS-Sm-x und WS-Sm-N:
MAHLE WS-elements for water removal are available as water absorber elements WS-Mic 25 with a low filter efficiency for particles or in combination with the highly efficient Sm-N 2 and Sm-x 10 configuration. A super absorper will change its chemical structure while absorbing water and indicates the amount of absorbed free water by an increase of flow resistance. The free water will be absorbed until the saturation limit is reached.
WS-elements are applicable for all common lubrication and hydraulic fluids. The filter property complies with the corresponding Mic-, Sm-x- and Sm-N 2 element. The flow resistance of a water-free liquid would be insignificantly higher.
Contact your local Brammer branch for further details.
EcoParts Filter Elements
Oil separator elements
9
MAHLE Industriefiltration now offers a complete product line for safe and cost-effective cartridge replacement in hydraulics applications. Your benefits:
• Comprehensive line of cartridges for pressure filters and return-line filters from a single source —in a number of
different designs and ratings
• Compatibility with many established manufacturers (cross-reference)
• Defined filter performance and cleanliness class
• Defined service life
• High level of functionality and safety
• Outstanding reliability and cost-effectiveness
• Certified quality
• Tested according DIN and ISO standards, with all prevalent industrial approvals
For further information, please consult our website at www.mahle-industrialfiltration.com.
Oil separator elements
Oil injected screw compressors dominate the modern compressed air supply.
MAHLE oil separator elements have proved themselves for years within this application. In combination with an appropriate selection of intake air cleaners and oil filters they ensure high-quality compressed air with long service life and low maintenance costs.
Contact your local Brammer branch for further details.
Air cleaner systems
MAHLE air cleaners ensure that compressors, vacuum pumps, and combustion engines have a continuous supply of clean intake air. The use of intake silencers also reduces the noise level. MAHLE series:
• Air filter systems series 7000
Contact your local Brammer branch for further details.
Air cleaner systems
888
www.brammer.biz
Hydraulics
94640 94633 58599
Images For Illustrative Purposes Only